A revised theoretical model for external inversion process over a circular die

Wanqi Zhang; Guansheng Yin; Minghui Shi; Pengfei Wei; Jianqiang Wang; Junkai Zhao

doi:10.1590/1679-78257973

A revised theoretical model for external inversion process over a circular die

Authors

Wanqi Zhang School of Science, Chang’an University, Xi’an 710064, China. https://orcid.org/0000-0002-9039-3519
Guansheng Yin School of Science, Chang’an University, Xi’an 710064, China. https://orcid.org/0000-0002-5117-5674
Minghui Shi School of Science, Chang’an University, Xi’an 710064, China. https://orcid.org/0009-0008-7412-634X
Pengfei Wei School of Science, Chang’an University, Xi’an 710064, China. https://orcid.org/0009-0008-9848-9110
Jianqiang Wang CCCC Civil Engineering Science & Technology Co. Ltd. Xi'an 710075, China https://orcid.org/0009-0009-0370-0559
Junkai Zhao School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China https://orcid.org/0009-0006-5757-658X

DOI:

https://doi.org/10.1590/1679-78257973

Abstract

As an ideal impact energy absorber, the external inversion process of thin-walled metal tubes over circular dies has been studied theoretically since 1960s. However, in the most existing theoretical models, the curvature in the deformation area is a constant and only the steady inversion force is studied. Limited research has been conducted on the whole inversion process. In this study, from experimental and numerical results, the curvature is found to be varying and the whole inversion process can be divided into two stages by three states. Then a modified geometric model is proposed and the force displacement curves is derived. Next, it has been observed that current theoretical results exhibit greater conformity with experimental and numerical results. Finally, the effects of the tube wall thickness, tube average radius and die radius on crashworthiness indicators are studied theoretically by the verified theoretical model. These outcomes offer valuable reference for further research on tube inversion forming and energy absorption characteristics of external inversion mode.

Downloads

Published

2024-01-25

Issue

Vol. 21 No. 2 (2024)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License [CC BY] that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).