DYNAMICAL COMPRESSIVE STRENGTH AND FAILURE OF NATURAL LAKE ICE UNDER MODERATE STRAIN RATES AT NEAR MELTING POINT TEMPERATURE
Keywords:
ICE MECHANICS, DYNAMICAL COMPRESSIVE STRENGTH, MODERATE STRAIN-RATE, FRACTURE MODES, AIR CONTENT, MELTING POINT TEMPERATURE, HIGH-SPEED CAMERAAbstract
THIS PAPER PRESENTS A SERIES OF UNIAXIAL COMPRESSIVE EXPERIMENTS ON NATURAL LAKE ICE UNDER MODERATE STRAIN-RATE IN THE RANGE OF 10−1 TO 102 S−1 AT −0.1 °C. NATURAL LAKE ICE SAMPLES OF 8 CM BY 8 CM IN CROSS SECTION AND 20 CM HIGH WERE USED TO INVESTIGATE STRAIN-RATE DEPENDENCE OF UNIAXIAL COMPRESSIVE STRENGTH AND FLAW EFFECTS ON ICE STRENGTH UNDER MODERATE STRAIN RATES. THE FRACTURE MODES OF ICE AT MODERATE STRAIN RATES WERE ALSO SYSTEMATICALLY INVESTIGATED BY USING HIGH-SPEED CAMERA. IT IS FOUND UNIAXIAL COMPRESSIVE STRENGTH OF NATURAL LAKE ICE INCREASES WITH INCREASING STRAIN-RATE IN THE EMPLOYED MODERATE STRAIN-RATE RANGE. AND NATURAL FLAWS SUCH AS AIR BUBBLE HAVE A SIGNIFICANT EFFECT ON UNIAXIAL COMPRESSIVE STRENGTH OF ICE UNDER MODERATE STRAIN-RATE, HIGHER AIR CONTENT ICE POSSESSES LOWER COMPRESSIVE STRENGTH. ICE FRACTURE MODE DEPENDS ON STRAIN-RATE (OR COMPRESSIVE VELOCITY) OF ICE SPECIMEN, VARYING FROM SPLITTING AT STRAIN RATES LOWER THAN 10 S−1 TO CRUSHING AT STRAIN RATES HIGHER THAN 10 S−1. ICE SPECIMEN CRUSHES INTO FINE FRAGMENTS MAY DUE TO INSUFFICIENT TIME FOR MICRO CRACKS TO PROPA-GATE, THUS RESULTS IN HIGHER STRENGTH. IN ADDITION, DEPENDENCY OF COMPRESSIVE STRENGTH ON STRAIN-RATE IN A WIDE STRAIN-RATE RANGE IS ALSO DISCUSSED.Downloads
Published
2017-07-10
Issue
Section
Articles
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License [CC BY] that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).