HIGH-VELOCITY PENETRATION OF CONCRETE TARGETS WITH THREE TYPES OF PROJECTILES: EXPERIMENTS AND ANALYSIS
Keywords:
HIGH-VELOCITY PENETRATION, DOUBLE-OGIVE-NOSE, GROOVED-TAPERED, CRATER DEPTH, PENETRATION ABILITY, TRAJECTORY STABILITYAbstract
IN THIS STUDY, HIGH-VELOCITY PENETRATION EXPERIMENTS WERE CONDUCTED USING CONVENTIONAL OGIVE-NOSE, DOUBLE-OGIVE-NOSE, AND GROOVED-TAPERED PROJECTILES OF APPROXIMATELY 2.5 KG AND INITIAL VELOCITIES BETWEEN 1000 AND 1360M/S TO PENETRATE OR PERFORATE CONCRETE TARGETS WITH UNCONFINED COMPRESSIVE STRENGTHS OF NOMINALLY 40MPA.THE PENETRATION PERFORMANCE DATA OF THESE THREE TYPES OF PROJECTILES WITH TWO DIFFERENT TYPES OF MATERIALS (I.E., AERMET100 AND DT300) WERE OBTAINED. THE CRATER DEPTH MODEL CONSIDERING BOTH THE PROJECTILE MASS AND VELOCITY WAS PROPOSED BASED ON THE TEST RESULTS AND A THEORETICAL ANALYSIS. THE PENETRATION ABILITY AND THE TRAJECTORY STABILITY OF THESE THREE PROJECTILE TYPES WERE COMPARED AND ANALYZED ACCORDINGLY. THE RESULTS SHOWED THAT CONSIDERING THE PROJECTILE MASS AND VELOCITY IS NECESSARY TO PREDICT THE CRATER DEPTH. MOREOVER, THE NEW MODEL ESTABLISHED IN THIS STUDY WAS RELIABLE. THE DOUBLE-OGIVE-NOSE PROJECTILE HAD A HIGHER PENETRATION ABILITY THAN THE CONVENTIONAL OGIVE-NOSE PROJECTILE. MEANWHILE, THE GROOVED-TAPERED PROJECTILE HAD A BETTER TRAJECTORY STABILITY.Downloads
Published
2017-06-17
Issue
Section
Articles
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License [CC BY] that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).