NUMERICAL AND THEORETICAL STUDIES ON COLD-FORMED STEEL UNLIPPED CHANNELS SUBJECTED TO AXIAL COMPRESSION
Keywords:
COLD-FORMED STEEL, BUCKLING, AXIAL COMPRESSION, UNLIPPED CHANNEL, FINITE ELEMENT ANALYSIS, CODAL PROVISIONS.Abstract
THIS PAPER PRESENTS BOTH THE ANALYTICAL AND THEORETICAL INVESTIGATIONS ON ULTIMATE LOAD CARRYING CAPACITY AND BEHAVIOUR OF CFS UNLIPPED CHANNELS WITH THEIR ENDS FIXED AND SUBJECTED TO AXIAL COMPRESSION. THE NUMERICAL STUDIES HAVE BEEN CARRIED OUT IN THE ELASTIC AS WELL AS IN THE PLASTIC RANGES OF LOADING. THE SLENDERNESS RATIO OF THE CHANNELS CHOSEN IS 40, 80,100 AND 120. THREE DIFFERENT WEB DEPTHS [SHALLOW, MEDIUM AND DEEP] WITH FIVE THICKNESSES HAVE BEEN CHOSEN. IN ADDITION TO THE NUMERICAL STUDIES, COMPARISON WITH THE DESIGN STRENGTHS PREDICTED BY USING NORTH AMERICAN STANDARDS FOR CFS STRUCTURES. IT IS OBSERVED THAT THE DESIGN STRENGTH PREDICTED BY THE SPECIFICATIONS ARE CONSERVATIVE FOR  AXIALLY LOADED COLUMNS. IN THE PRESENT INVESTIGATION, AN   ATTEMPT IS MADE TO STUDY THE ULTIMATE LOAD CARRYING CAPACITY AND THE MODE OF FAILURE. LOAD VERSUS AXIAL SHORTENING BEHAVIOUR HAS BEEN STUDIED FOR VARIOUS SLENDERNESS RATIOS FOR A FEW SPECIMENS.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License [CC BY] that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).